Sierra Wireless AirCard 555 User Manual page 72

AirCard 555 Network Card User Guide
72
Add...
2. Click the button to open the Connection Properties
window.
3. Enter a name for the connection and complete the
remaining fields noting the following:
· If the phone number must be preceded with an area
Use area code
code, click the
Use 1
code. Click the
must be prefixed with a 1.
· Enter a user name if it is required. If you want to store a
password so that it is not necessary to enter it each time
you connect, click the
your password.
OK
4. Click to close the window and save the information
Cancel
you entered, or
To change an existing record in the Dial-Up Manager window:
1. Click the connection to select it and click the
button to open the Connection Properties window.
2. Enter the new information in the appropriate fields. (The
Connection Name
cannot be changed.)
OK
3. Click to close the window and save the information
Cancel
you entered, or
To delete a record in the Dial-Up Manager window:
1. Click the connection to select it and click the
2. When prompted to confirm the deletion, click
To connect to a number in the Dial-Up Manager window:
1. Click the connection to select it and click the
button.
The AirCard then attempts a connection to the phone number
you selected.
check box and enter the area
check box if the phone number
Save password
check box and enter
to close the window without saving.
Properties...
to close the window without saving.
Delete
Connect
button.
Yes
.
2130142