Sierra Wireless AirCard 555 User Manual page 155

Rev 3.3 May.02
Chapter 14: The Watcher Menu Options
3. Enter a name for the connection and complete the
remaining fields noting the following:
· If the phone number must be preceded with an area
Use area code
code, tap the
Use 1
code. Tap the check box if the phone number must
be prefixed with a 1.
· Enter a user name if it is required. If you want to store a
password so that it is not necessary to enter it each time
you connect, tap the
your password.
Save
4. Tap (Pocket PCs) or
window and save the information you entered, or
(Pocket PCs) or the close button (Handheld PCs) to close
the window without saving.
To change an existing record in the Dial-Up Manager window:
1. Tap the connection to select it and tap the
button to open the Connection Properties window.
2. Enter the new information in the appropriate fields. (The
Connection Name
cannot be changed.)
Save
3. Tap (Pocket PCs) or
window and save the information you entered, or
(Pocket PCs) or the close button (Handheld PCs) to close
the window without saving.
To delete a record in the Dial-Up Manager window:
1. Tap the connection to select it and tap the
2. When prompted to confirm the deletion, tap
To connect to a number in the Dial-Up Manager window:
1. Tap the connection to select it and tap the
The AirCard then attempts a connection to the phone number
you selected.
check box and enter the area
Save password
check box and enter
OK
(Handheld PCs) to close the
Properties...
OK
(Handheld PCs) to close the
Delete
button.
Yes
.
Connect
Cancel
Cancel
button.
155