De-Registering Handsets; Gigaset Repeater - Siemens Gigaset CX203isdn Owner's Manual

Operating with other devices

De-registering handsets

i
s
Set base
s
Settings
~
OK
s
Setup user
s
De-reg. device
s
INT16: Int.16
j

Gigaset Repeater

You can increase the range of your handsets with the Gigaset Repeater. You can operate
up to six repeaters on your base station. To ensure the repeater is installed correctly,
repeater capability must be activated on the base station.
Activating/deactivating repeater mode
You can use this function to activate and deactivate repeater mode.
By factory default, this repeater capability is deactivated.
i
s
Set base
s
Settings
~
OK
s
System settings
s
Spec. function
s
Repeater
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
NEXT
122
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the handset that you wish to de-register and
OK
confirm, e.g. INT16: Int.16.
Hold down. Return to the idle state.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 89).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Press the display key to save the setting. The handset
goes off briefly (
‰
= activated).