Calling An Answering Machine In The Network (On Cx203Isdn); Restoring The Factory Settings - Siemens Gigaset CX203isdn Owner's Manual

Siemens owner's manual telephone cx253isdn, cx203isdn

Table of Contents

System settings

Calling an answering machine in the network (on CX203isdn)

Press 1 and hold. You are connected directly to the answering machine in the

network. If you then press the handsfree key d, you can listen to the answering

machine announcement in the network and operate the answering machine via the

network.

Changing the answering machine number in the network

Set base

Settings

System settings

Network Mailb.

Change number

Save entry

Viewing/listening to answering machine messages in network

If a message arrives for you, you receive a call from the answering machine in the

network. The number, e.g. 0800 330 2424 for T-NetBox, appears in the display if you

have requested calling line identification. If you accept the call, the new messages are

played back. If you do not accept the call, the number of the answering machine in the

network will be stored in the missed calls list and the message key flashes.

You can select which type of reset should be performed:

Operational – All MSNs and access codes (outside line code) are deleted and the AM

(answering machine) PIN (only on Gigaset CX253isdn) is set to 0000. The authorisations

are reset to "Dial and answer".

Reset all – All functions are reset to their factory defaults. The system PIN is reset to

"0000". All entries (caller list, charges) are deleted.

For both functions: Deactivate all active call diversions before resetting!

The terminals remain registered.

Set base

Settings

108

Open the menu.