Siemens Gigaset CX203isdn Owner's Manual page 61

SMS (text messages)
You can display information about the cause of errors on the screen.
Precondition: You have opened the incoming message list (page 56).
s
W
s
Error status
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
BACK
Errors when receiving a text message
A message appears on the screen if your phone cannot receive any more text messages.
You cannot receive text messages under the following conditions:
Call diversion is activated with Immediately,
◆
the memory (incoming and outgoing message lists) is full.
◆
Self-help with error messages
Error Message
You cannot send messages.
You receive a message whose
text is incomplete.
The message is played back.
Messages are only received
during the day.
No send centre available! SMS
only saved.
If you have set up an SMS centre but have not yet registered with the centre, Sending
text notification appears in the display. The message is stored in the incoming message
list FD error:.
60
Scroll to the text message you were unable to send.
Open the submenu.
Select the menu item and confirm. The cause of the
OK
error appears in the display.
Now press the display key to return to the incoming
message list.
Possible Cause
The "Calling Line Identification"
(CLIP) is permanently withheld.
Message transmission was
interrupted (e.g. by an
incoming call).
No number or an invalid
number is entered for the SMS
centre activated as the send
centre.
Your phone's memory is full.
Your terminal is stored in the
database of your SMS provider
as having no fixed network
SMS functionality, i. e. you are
no longer registered with the
provider.
If your SMS network provider's
database does not yet know
that your terminal supports
fixed network SMS
functionality, then it will only
attempt to deliver messages
during the day.
You have not entered an SMS
centre.
Remedy
Permit Calling Line
Identification (CLIP) again
(page 22).
Re-send the message.
Enter phone number
(page 48).
Delete some old messages
(page 57).
Register the terminal (again)
for SMS reception.
Register the terminal (again)
for SMS reception to get it re-
assigned in the database.
Activate an SMS centre
(page 49).