Siemens Gigaset CX203isdn Owner's Manual page 121

Operating with other devices
Registering a Gigaset 3000 Comfort/Micro handset
−
either ...
YES
or ...
.
s
Stations
s
Station1
s
Registration
... then
~
OK
s
INT11: Int.11
The next unassigned internal number between Int.11 and Int.16 is automatically
assigned to the handset as it is registered.
Registering a Gigaset 3000 Classic handset
−
¦ ¨ «
~
OK
~
OK
s
INT11: Int.11
120
Hold down to turn on the handset.
Confirm the prompt.
Open the menu.
Select the menu item and confirm.
OK
Select base (1-4) and open the submenu.
Select the menu item and confirm.
OK
Enter the system PIN of the base (factory default:
0000) and confirm.
Select internal number and confirm, e.g. INT11:
OK
Int.11. Successful registration is confirmed on the
display.
Hold down to turn on the handset.
Press in turn.
Enter the number of the base (normally 1) and
confirm. The ready symbol
up continuously when the connection to the base
has been established.
Enter the system PIN of the base (factory default:
0000) and confirm.
Select internal number and confirm, e.g. INT11:
OK
Int.11. After successful registration, the ready
symbol is extinguished.
C flashes and then lights