Siemens Gigaset CX203isdn Owner's Manual page 38

Selecting a phone number from the Phonebook
If you are prompted to enter an external phone number while you are operating your
telephone, you can use the Phonebook from your base station to do this.
Precondition: The input field for external telephone numbers is displayed.
h
s
OK
The phone number of the entry is added to the entry field.
Sending a single entry or complete list to a handset
To handset: S44
You can send single entries or the complete list to another handset that is registered on
your base station. This avoids entering information twice.
h
Ÿ
s
W
either ...
s
Send entry
or ...
s
Send list
... then
~
OK
After an entry has been sent you are asked if you want to send another entry. If you
confirm with the display key
finished sending, press the display key
The successful transfer of data is confirmed with a message and with the confirmation
tone at the receiving handset. Existing entries in the receiving handset are retained.
Entries with identical numbers are not overwritten. The number of entries that are
stored in the receiving handset may therefore differ from the number of entries that you
have sent to it.
The transfer is cancelled if the receiving handset's memory is full. The last entry to be
transferred appears in the display.
If an entry with no name is sent to a handset, the last 16 digits of the phone number are
entered as the name.
Open the Phonebook.
Select entry and confirm.
S1 SL1
Open the Phonebook or speed dial list.
Select an entry and open the menu.
Send a single entry:
Select the menu item and confirm.
OK
Send complete list:
Select the menu item and confirm.
OK
Select internal subscriber and confirm.
Sending is initiated.
you can select more entries to send; once you have
YES
to end it.
NO
Using the Phonebook and other lists
C34 C32 C2
37