Sending A Text Message And The Outgoing Message List - Siemens Gigaset CX203isdn Owner's Manual

Sending a text message and the outgoing message list

Notes on writing and sending an SMS message
If you are interrupted as you are writing (by a call, an incoming SMS or because the
handset changes to idle status because of prolonged inactivity), the SMS is
automatically stored in the outgoing message list. You can continue writing the SMS
later (page 53).
Text messages that cannot be sent are assigned an error status (page 59) and are placed
in the incoming message list.
Text messages are only stored automatically if sending is interrupted. If you wish to
store a message then you must do so before it is sent.
i
Remember that some service providers will bill you for a cancelled call
to the SMS centre.
Writing text messages
A text message can be up to 160 characters long.
Remember that the service provider cannot deliver a text message that contains Greek
or Cyrillic characters.
Write text messages as follows:
i
SMS
Write message
~
with tomorrow
< > X W
Please refer to the Character Set Chart (page 131) to see how to
◆
enter text correctly.
Use Q to insert a space, and P to toggle between upper case, lower
◆
i
case and digits (page 131).
You can find out how to correct text on page 10.
◆
If you receive a text message that is incomplete (e.g. because your
◆
phone memory is full), you will see a message.
Open the menu.
Confirm.
OK
Confirm. The input field opens.
OK
Input your text (for text input see page 131).
SMS (text messages)
51