Connecting The Base Station - Siemens Gigaset CX203isdn Owner's Manual

Preparing the base station for use

Connecting the base station

Note the specified sequence
1.
Insert the plug on the long end of the coiled receiver cord into the socket on the
◆
base station
Place the receiver cord in the cable recess
◆
Plug the other end of the receiver cord into the receiver
◆
Underside of
base station
(enlarged view)
2.
Plug one of the ISDN connecting cable jacks into the socket on the base station
◆
(it clicks into place)
Position cable in the cable recess
◆
Insert the second ISDN connecting cable jack into the NTBA (ISDN connection).
◆
8
Socket for Socket for ISDN
power cord connection cable
Socket for coiled
receiver cord
Schematic illustration
ISDN connection
cable (NTBA)
1.
Telephone plug
with ISDN cable