Siemens Gigaset CX203isdn Owner's Manual page 47

Making cost-effective calls
Displaying and deleting the cost overview
Depending on the setting, call or charge units for each internal user, for each set-up
MSN, and for the entire system are displayed.
i
s
Costs
Cost overview
s
W
s
Delete amount
Total and individual charges must be deleted separately, i .e. if
i
for example you delete the amount for an MSN, the individual charges for
the terminals are retained, and must be deleted separately.
Activating/deactivating the charges of the last call
You can display the total charges and the charges of the last call for this terminal on the
terminal. Precondition: MSN next call is not activated.
By factory default, Last charge is deactivated.
i
s
Costs
s
Last charge
j
Once the function has been activated, the call charges are displayed on the terminal
when you lift the receiver. If the connection was not successful, the charges are
displayed after ending the call.
46
Open the menu.
Select the menu item and confirm.
OK
Confirm. The total amount (for all internal users) is
OK
displayed.
Scroll to the accounts for the individual internal
users or MSNs set up.
If necessary, delete the amount from the cost
overview:
Press the display key to open the submenu.
Select the menu item and confirm.
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
Hold down (back to idle status).
‰
= activated).