Siemens Gigaset CX203isdn Owner's Manual page 116

Assigning call diversion to a function key
You can assign an immediate call diversion to a function key; the general diversion path
set for call diversion is then applicable (page 97).
Precondition: You have assigned the function key (page 113).
... then
s
ISDN Functions
s
Forward immediat
s
MSN1:
~
W
Save entry
After this function key is pressed, the display shows the specified
◆
i
phone number. Call diversion is activated.
Pressing the function key again deactivates the call diversion.
◆
Assigning a send MSN to a function key
You can use the send MSN to specify which phone number you want to use for the next
call. Dialling this send MSN using the function key only applies to the next outgoing call.
Precondition: You have assigned the function key (page 113).
... then
s
ISDN Functions
s
MSN next call
s
MSN1:
Assigning identify caller (MCID) to a function key
Identify caller (page 26) is used to identify annoying or threatening callers.
Precondition: You have applied for Identify caller with your network provider.
... then
s
ISDN Functions
s
Identify caller
Activate this function during the call or immediately after the caller has hung up. You
must not end the call yourself.
i
You may not replace the receiver!
Select the menu item and confirm.
OK
Select the type of call diversion and confirm,
OK
e.g. Forward immediat.
Select MSN and confirm, e.g. MSN1: Anna.
OK
Enter the phone number and open the submenu.
Confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select MSN and confirm, e.g. MSN1: Anna
OK
(‰ = set).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Setting the volume, display and keys
115