INSTALLATION
14
INSTALLING SPLASHGUARD BRACKETS
Attach splashguard retainer and splashguard retainer support to splashguard support bracket using two screws per
bracket. DO NOT place shims under splashguard brackets.
INSTALLING SPLASHGUARDS
The splashguard is shipped inside each merchandiser. After merchandisers have been leveled and joined,
and all drip piping, electrical and refrigeration work has been completed, re-install the front color panel, then
install the splashguards.
First, position top of splashguard over the top edge of the bracket; second, push the lower edge of the
splashguard toward the bottom of the bracket until it snaps into place. Splashguards are joined with a galvanized
metal splice connector that comes with the joint kit. Join the splashguards before installing on case.
Splashguard
Joint
P/N 3124450_A
Splashguard
Retaining
Bracket
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM
Splashguard
Splice Connector
Side
Detail