Barco UDX Series User Manual page 97

If a 3D emitter is used that radiates infrared beams (IR beams), the IR beams may interfere with the
IR communication between projector and the RCU. If such interference occurs, connect the RCU to
the projector using the remote cable. It is also advised to turn the IR receivers on the projector off to
avoid the 3D emitter interference. To turn off the IR receivers, see "Remote control, on/off button",
page 23.
How to adjust the projector to the 3D emitter?
1. In the main menu, select Installation → 3D Setup.
Image 8-61: Installation menu, 3D setup
The 3D setup menu is displayed
Image 8-62
2. Select the desired the stereo Dark Time.
3. Use the slider to set the desired stereo sync delay.
4. If necessary to invert the stereo sync, click the Swap Eye option.
GUI – Installation
R5906112-06 UDX series 97