P7 Realcolor - Barco UDX Series User Manual

Image 7-10: Advanced menu – Gamma
2. Use the ◄ or ► key to change the gamma value between 1.0 and 2.8 . The default value is 2,2.
Tip: The slider can be adjusted with a precision of 0.1.
Image 7-11: Gamma slider
3. If necessary, use the ▲ or ▼ key to select the other image adjustment options.

7.4 P7 Realcolor

Purpose
When blending images from multiple projectors, the measured color coordination of each projector can be
altered to a desired common level. This so that the projected colors are identical over all projectors used.
Alternatively, if you are unfamiliar with how adjusting the Colors to a specific setting, there are also a certain
number of presets available, which forces the color output to specific color standards.
How to set custom P7 values
1. In the main menu, select Image → Advanced → P7 Realcolor.
Image 7-12: Advanced menu — P7 Realcolor
The P7 menu is displayed.
GUI – Image
R5906112-06 UDX series 65