Flex Brightness - Barco UDX Series User Manual

GUI – System Settings
Image 9-26: Lens Calibration menu
4. In the Lens Calibration menu, select the desired calibration action and click OK.
You can select one of the following functions:
• Horizontal shift
• Vertical shift
• Focus
• Zoom
The text Calibration in progress will be displayed next to selected function until the calibration is completed.
When an error is detected, the message Calibration Error is displayed next to function.

9.6.4 Flex brightness

Overview
With the FLEX technology the projector owners can lock the light output to different levels. The locking can be
done via 3 different ways:
• Via Projector Toolset when connected via an Ethernet connection with the projector. See Projector
Toolset's user guide, chapter ""FLEX, light output control"".
• Via the OSD menu of the projector itself
• Via an SMS message send to a projector equipped with an optional GSM board.
To lock to a specific value a 4 digit code is necessary; These codes can be created by the projector owner
using Projector Toolset.
Light output activation via OSD menu
1. In the main menu, System Settings → Service.
Image 9-27
2. Enter the service code.
3. In the Service menu, select Flex.
110 R5906112-06 UDX series