Barco UDX Series User Manual page 114

GUI – System Settings
ImageBlend
ImageRealColor
ImageStereo
ImageDisplay
ImageOrientation
ImageSource
ImageFeatures
How to reset all projector settings
1. In the main menu, select System Settings → Reset.
2. In the Reset menu, select RESET ALL and click OK.
How to reset one or more projector settings
1. In the main menu, select System Settings → Reset.
Image 9-35: System Settings menu, Reset
The Reset menu is displayed.
114 R5906112-06 UDX series
Setting
Warp files
Blend/Mask size
Black Level
Black Level Files
Blend Files
P7 Realcolor
Sync delay
Swap eye
Dark time
Display mode
Orientation
Source files
Contrast
Brightness
Saturation
Sharpness
Gamma
Cropping (if applicable)
Aspect Ratio (if applicable)
Default value
Disabled, no files selected
disabled, all value to zero
Disabled, no files selected
all set to native
0 µs
Off
lowest value available
AutoStereo
Table, Front
Standard
mid value
mid value
mid value
mid value
mid value
Off
16:9