Table of Contents
Advertisement
Operating the answer machine of the Gigaset C385 base station
Activating/deactivating call
screening
During recording of a message you can
screen calls via the loudspeaker of the
base station and registered handsets.
Permanently activating/deactivating
call screening
¢
¢
Voice Mail
§Menu§
¢
Handset
/
Base
(‰ = on)
a
Press and hold (idle status).
Call screening can be simultaneously acti-
vated on the base station and handset.
Deactivating call screening for the
current recording
a
Press the end call key.
Setting up the answer machine
The answer machine has already been
preset at the factory. Make individual set-
tings using the handset.
Setting call acceptance
You can set when you want the answer
machine to answer a call.
The options are: Immediately,
or
30 sec
and Auto.
In
Auto
mode, the following applies for call
acceptance:
u
If there are no new messages, the
answer machine answers a call after
18 seconds.
u
If new messages are present, the
answer machine accepts a call after just
10 seconds.
38
Call Screening
10
sec,
18 sec
¢
¢
Voice Mail
§Menu§
q
Select an option
10 sec
/
18 sec
press
§OK§
a
Press and hold (idle status).
Setting the recording time
You can set the maximum recording time
of a message.
The options are:
1
Minute,
or Unlimited.
3 Minutes
¢
¢
Voice Mail
§Menu§
q
Select a recording time and
press
§OK§
a
Press and hold (idle status).
Resetting fast access for the
answer machine using key 1
The integrated answer machine has
already been preset for fast access at the
factory. However, if you have set the net-
work mailbox for fast access (
you can reset this setting.
¢
¢
Voice Mail
§Menu§
Answer Machine
Select and press
a
Press and hold (idle status).
When you have selected the answer
machine, press and hold key 1. You will be
connected directly.
The setting for fast access applies to all
registered handsets.
Ring Delay
/
Immediately
/
30 sec
/
Auto
and
(‰ = on).
2
Minutes,
Message Length
(‰ = on).
¢
page 40),
Set Key 1
.
§OK§
Advertisement
Table of Contents
