Activating/Deactivating Call Screening; Setting The Recording Parameters - Siemens SL400 User Manual

Diverting an external call to the
answering machine
You can divert an incoming external call to
the answering machine, even if it is deacti-
vated.
Prerequisite: sufficient memory space is
available on the answering machine.
An external call is signalled on the handset:
Ô
Select display key.
The answering machine starts immediately
in answer & record mode and records the
call. The set time for ring delay (
is ignored.
Activating/deactivating two-way
record
You can record an external call with the
answering machine.
¤
Inform the caller that the call is being
recorded.
§Options§
Open menu.
Two-Way Record
Select and press
Two-way record is indicated on the display
by an advisory text and is added to the
answering machine list as a new message.
§End§
Press the display key to stop
two-way record.
The maximum recording time depends on
the memory available on the answering
machine. If the memory is full, you will hear
an end tone, the recording is aborted, and
the call recorded up to that point is listed in
the answering machine list as a new mes-
sage.
50
¢
page 50)
§OK§
.
•
Activating/deactivating
call screening
During recording of a message, you can
screen a call via the loudspeaker of regis-
tered handsets.
Permanently activating/deactivating
call screening
¢ ¢
Ì
v
Call Screening (³= on)
§Change§
Select display key to activate/
deactivate the function.
Deactivating call screening for the
current recording
You can deactivate the function for your
own handset during the recording.
§Silence§
Press the display key.
•
Setting the recording
parameters
The answering machine has already been
preset at the factory. Individual settings can
be adjusted using the handset.
¢ ¢
v Ì
Recordings
¤
You can enter data in the following fields:
Length:
Maximum recording time, select 1 min.,
2 min., 3 min. or Maximum.
Quality:
Select Long Play or Excellent recording
quality. If the quality is higher, the maxi-
mum recording time is reduced.
Ring Delay:
Select when the answering machine
should accept a call:
Immediately, after 10 sec., 18 sec.,
30 sec. or Automatic.
§Save§
Press the display key.