Siemens Gigaset 150 Owner's Manual page 40

Self-help with error messages
Error Message
You cannot send messages.
You receive a message whose
text is incomplete.
The message is played back.
Messages are only received
during the day.
Possible Cause
You have not requested the
CLIP service (Calling Line Iden-
tification Presentation).
Message transfer was inter-
rupted (e.g. by a call).
The number of the SMS centre
selected as the send centre is
not entered or is incorrect.
Your phone's memory is full.
The "display call number" serv-
ice is not activated.
The terminal is stored in your
SMS provider's database as not
having fixed network SMS
functionality.
If your SMS network provider's
database does not yet know
that your terminal supports
fixed network SMS functional-
ity, then it will only attempt to
deliver messages during the
day.
SMS (Text Messages)
Remedy
Ask your network provider to
activate this service.
Re-send the message.
Enter the correct number.
Delete some old messages
(page 35).
Ask your network provider to
activate this service (there is a
charge for this).
Register the terminal with the
service provider (again) for
SMS reception to get it re-
assigned in the database.
Register the terminal with the
service provider (again) for
SMS reception to get it re-
assigned in the database.
39