Setting The Answering Machine Of The C 150 Base; Ring Delay And Charge Saving Function For Remote Operation - Siemens Gigaset 150 Owner's Manual

Setting the Answering Machine of the C 150 Base

Setting the Answering Machine of the C 150
Base
The answering machine has already been preset at the factory. You can however make
individual settings using the handset.

Ring delay and charge saving function for remote operation

You can set when you want the answering machine to activate. The options are: imme-
diately, after 10 sec., 20 sec. (the default setting) or 30 sec. Instead of a fixed ring delay
you can also select the charge saving setting Auto.
In this setting the answering machine activates automatically:
after 10 seconds if there are new messages;
N
after 20 seconds if there are no new messages.
N
After around 15 seconds in remote operation you will know that there are no new mes-
sages (otherwise the answering machine would have already activated). There will be
no call charges if you hang up now.
Please remember:
Only ringer melodies 1-3 are the same as the call tones during a call.
N
i
With all ringer tones the first ringer tone is suppressed. You can can-
N
cel the suppression of the first ringer tone (page 60).
[______________]
MENU
[__________] [_____________________________________________________________]
Voice Mail
[__________] [_____________________________________________________________]
Ring Delay
[_________] [_________]
OK
48
Press the display key to open the menu.
Select the menu item and confirm.
[_________ ]
OK
Select the menu item and confirm.
[_________ ]
OK
Select Auto, 10 sec, 20 sec, 30 sec or Immediately
and confirm.