Last Number Redial List - Siemens Gigaset 150 Owner's Manual

Using the directory and other lists
Picking a phone number from the directory/speed dial list
If you are prompted to enter a telephone number while you are operating your tele-
phone, you can use the directory to do this.
Precondition: The entry field for external telephone numbers is displayed.
or
[_________] [_________]
OK
The telephone number is added to the entry field.

Last number redial list

The last number redial list contains the ten last dialed numbers. If names have been
stored for these numbers in the directory, then both the names and the numbers will be
displayed. You can use the last number redial list to redial the telephone numbers.
Dialling telephone numbers from the last number redial list
•
[_________ ]
[_________ ]
To add or change the telephone number, press
N
Display Number
i
To add a telephone number from the last number redial list to the
N
directory (page 21), press
Deleting a single telephone number or the entire last number redial list
•
[_________ ]
[_________] [_________________]
MENU
either ...
[__________] [_____________________________________________________________] Delete Entry
or ...
[__________] [_____________________________________________________________]
Delete List
22
Open directory or speed dial list
Select the entry and confirm.
Open the last number redial list.
Select an entry and press the top half of the key.
The number is dialed.
OK.
with
MENU
Open the last number redial list.
Select an entry and open the menu.
Delete a single telephone number:
Select the menu item and confirm.
[_________ ]
OK
If there still entries on the list, press the key and hold
(back to idle status).
Delete the entire last number redial list:
Select the menu item and confirm.
[_________ ]
OK
MENU
,
Copy to Directory
and confirm
.
OK