Table 10: Advanced Settings - Grandstream Networks HT701 User Manual

Analog telephone adaptors

Hide thumbs Also See for HT701:

User manual (54 pages)

Configuration manual (8 pages)

Quick start manual (4 pages)

Table Of Contents

Table of Contents

Port Status

Displays relevant information regarding the FXS port.

• FXS port is registered with SIP Server.

• FXS Port user has set Do Not Disturb.

• FXS Port user has set his calls to be unconditionally forwarded to ext 613.

• FXS Port user has not set Busy or Delay call Forward.

password is case sensitive and the factory default password for Advanced User is "admin".

Advanced User configuration includes the end user configuration and the advanced configurations including:

a) SIP configuration, b) Codec selection, c) NAT Traversal Setting and d) other miscellaneous configuration.

HT701 and HT702 FXS SIP account(s) have its own configuration page. HT704 has two (2) profiles for the

four (4) FXS ports.

Admin Password

This contains the password to access the Advanced Web Configuration page. This

field is case sensitive. Only the administrator can configure the "Advanced

Settings" page. Password field is purposely left blank for security reasons after

clicking update and saved. The maximum password length is 25 characters.

Layer 2 QoS

Set values for :

802.1Q/VLAN Tag (0-4094)

SIP 802.1p (0-7)

RTP 802.1p (0-7)

STUN Server is

IP address or Domain name of the STUN server.

Keep-alive interval

This parameter specifies how often the HT70X sends a blank UDP packet to the

SIP server in order to keep the "hole" on the NAT open. Default is 20 seconds.

Minimum value is 20 seconds.

Port

Hook

Registration

FXS

On Hook

Registered