Grandstream Networks HT701 User Manual
  1. Manuals
  2. Brands
  3. Grandstream Networks Manuals
  4. Adapter
  5. HT701
  6. User manual

Grandstream Networks HT701 User Manual

Analog telephone adaptor
Hide thumbs Also See for HT701:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Grandstream Networks, Inc.
HT701/HT702/HT704
Analog Telephone Adaptor
HT701
HT702
HT704
HT70X USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Grandstream Networks HT701

Summary of Contents for Grandstream Networks HT701

  • Page 1 Grandstream Networks, Inc. HT701/HT702/HT704 Analog Telephone Adaptor HT701 HT702 HT704 HT70X USER MANUAL...
  • Page 2 This page is intentionally left bank...

  • Page 3: Table Of Contents

    HT70X USER MANUAL INDEX GNU GPL INFORMATION ................. 4 CHANGE LOG ................... 5 CHANGES FROM 1.0.6.1 USER MANUAL ..................5 CHANGES FROM 1.0.5.2 USER MANUAL ..................5 CHANGES FROM 1.0.4.14 USER MANUAL ..................5 CHANGES FROM 1.0.4.8 USER MANUAL ..................5 CHANGES FROM 1.0.3.1 USER MANUAL ..................
  • Page 4 CALL FEATURES ..................23 CONFIGURATION GUIDE ............... 25 CONFIGURING THE HT70X THROUGH VOICE PROMPTS ............25 CONFIGURING THE HT70X VIA WEB BROWSER ................25 Access the Web Configuration Menu ................... 25 IMPORTANT SETTINGS ........................26 NAT Settings ..........................26 DTMF Methods ..........................27 Preferred VOCODER (Codec) ......................
  • Page 5 ABLE CCOUNT ETTINGS 12: HT704 FXS P ...................... 44 ABLE ORTS ETTINGS GUI I ONFIGURATION NTERFACE XAMPLES HT70X USER MANUAL (http://www.grandstream.com/products/ht_series/ht701/documents/ht70x_gui.zip) 1. S CREENSHOT OF DVANCED ONFIGURATION 2. S CREENSHOT OF ASIC ETTINGS ONFIGURATION 3. S FXS P CREENSHOT OF ONFIGURATION 4.

  • Page 6: Gnu Gpl Information

    GNU GPL INFORMATION HT70X firmware contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License (GPL) for the exact terms and conditions of the license. Grandstream GNU GPL related source code can be downloaded from Grandstream web site from: http://www.grandstream.com/support/faq/gnu_gpl FIRMWARE VERSION 1.0.7.3...

  • Page 7: Change Log

    CHANGE LOG This section documents significant changes from previous versions of HT70X user manuals. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. CHANGES FROM 1.0.6.1 USER MANUAL •...

  • Page 8: Changes From 1.0.3.1 User Manual

    CHANGES FROM 1.0.3.1 USER MANUAL • Added the option to enable/disable HTTP Access [ HTTP Access • Added the option to enable/disable Authenticate incoming INVITE [ Authenticate incoming INVITEHTTP Access • Added ability to configure the time of re-register before registration expired [ Reregister before Expiration •...

  • Page 9: Welcome

    WELCOME Thank you for purchasing Grandstream’s HT70X, the affordable, feature rich Analog Telephone Adaptor. Grandstream HandyTone70X is a new addition to the popular HandyTone ATA product family. It features the rich audio quality, a broad range of voice codecs, and functionality including one independent SIP account per FXS port.
  • Page 10 Reproduction or transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose is not permitted without the express written permission of Grandstream Networks, Inc. FIRMWARE VERSION 1.0.7.3 HT70X USER MANUAL...

  • Page 11: Connect Your Ht70X

    CONNECT YOUR HT70X Connecting the HT70X is easy. Before you begin, please verify the contents of the HT70X package. EQUIPMENT PACKAGING The HT70X ATA package contains: • One HT70X Main Case • One Universal Power Adaptor • One Ethernet Cable •...

  • Page 12: Table 1: Definisions O Fthe Ht70X Connectors

    POWER LED Indicates Power. Remains ON when power is connected Internet LED Indicates Access to Internet. Remains ON while there is Access (HT701 and HT702 Only) Link/Activity LED Indicates if There is Activity on the Internet Port (HT701 and HT702 Only)

  • Page 13: Table 3: Advanced Definitions Of The Ht70X Leds Pattern

    Unregistered – OFF Registered and Available – ON (Solid Green) Off-Hook / Busy – Blinking every second Slow blinking FXS LEDs indicates voicemail NOTE: All LEDs display green when ON TABLE 3: ADVANCED DEFINITIONS OF THE HT70X LEDS PATTERN LED-01 Device has normal power Power LED-02...

  • Page 14: Figure 2: Ht70X Connection Diagram

    Phone 3sec OFF *Note: In Provisioning and Firmware Recovery Stage, the power LED is Steady ON. Cordless Phone Analog Internet HT701/702/704 ADSL/Cable Modem Ethernet FIGURE 2: HT70X CONNECTION DIAGRAM FIRMWARE VERSION 1.0.7.3 HT70X USER MANUAL Page 12 of 52...

  • Page 15: Ht70X Featrues

    HT70X FEATRUES The HT70X is a full feature voice and fax-over IP device that offers a high-level of integration including a 10M/100Mbps network port and one FXS telephone port, market-leading sound quality, rich functionalities, and a compact and lightweight design. The VoIP network signaling protocol supported is SIP.

  • Page 16: Hardware Specification

    Features forward, 3-way conferencing, message waiting, Do-Not-Disturb (DND), call-return service HARDWARE SPECIFICATION The table below lists the Hardware and Technical specification of HT70X. TABLE 5: HT70X HARDWARE AND TECHNICAL SPECIFICATIONS HT701 HT702 HT704 Telephone 1 RJ11 FXS port 2 RJ11 FXS ports...
  • Page 17 LINK/ACTIVITY, PHONE LINK/ACTIVITY, PHONE3, PHONE4 PHONE1, PHONE2 Factory Reset Button Universal Input: 100–240 VAC/50-60 Hz Input: 100–240 VAC/50-60 Hz 0.18A Max Switching 0.18A Max Output: 12VDC, 0.5A, UL certified Power Adaptor Output: 12VDC, 1A, UL certified Environmental Operational: 32 –104 F or 0 –40 Storage: 14...
  • Page 18 This page is intentionally left bank FIRMWARE VERSION 1.0.7.3 HT70X USER MANUAL Page 16 of 52...

  • Page 19: Basic Operations

    BASIC OPERATIONS UNDERSTANDING HT70X VOICE PROMPT HT70X has a built-in voice prompt menu for simple device configuration. The IVR menu and the LED button work with any of the FXS port. Pick up the handset and dial “***” to use the IVR menu. TABLE 6: HT70X IVR MENU DEFINITIONS MENU VOICE PROMPT...

  • Page 20: Placing A Phone Call

    Firmware Version Firmware version information. Firmware upgrade mode. Press “9” to toggle among the following Firmware Upgrade three options: - always check - check when pre/suffix changes - never upgrade “Direct IP Calling” Enter the target IP address to make a direct IP call, after dial tone. (See “Make a Direct IP Call”.) Voice Mail Number of Voice Mails...

  • Page 21: Direct Ip Calls

    Examples: 1. Dial an extension directly on the same proxy, (e.g. 1008), and then press the # or wait for 4 seconds. 2. Dial an outside number (e.g. (626) 666-7890), first enter the prefix number (usually 1+ or international code) followed by the phone number. Press # or wait for 4 seconds. Check with your VoIP service provider for further details on prefix numbers.

  • Page 22: Call Hold

    b) If the target IP address/port is 192.168.1.20:5062, then the dialing convention would be: *47 or Voice Prompt with option 47, then 192*168*0*160*5062 followed by pressing the “#” key if it is configured as a send key or wait for 4 seconds. NOTE: When completing direct IP call, the “Use Random SIP/RTP Port”...

  • Page 23: 3-Way Conferencing

    A can pick up the phone to resume conversation with B. 3-WAY CONFERENCING The HT701/702/704 supports Bellcore style 3-way Conference. Instructions for 3-way conference: Assume that call party A and B are in conversation. Caller A(HT70X) wants to bring third Caller C into conference: 1.
  • Page 24 This page is intentionally left bank FIRMWARE VERSION 1.0.7.3 HT70X USER MANUAL Page 22 of 52...

  • Page 25: Call Features

    CALL FEATURES The HT70X supports all the traditional and advanced telephony features. TABLE 7: HT70X CALL FEATURES CALL FEATURES Forcing a Codec (per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729 (G729), *0272616 (G726-r16), *0272624 (G724-r24), *0272632 (G726-r32), *0272640 (G726-r40), *027201 (iLBC) Disable LEC (per call) Dial “*03”...
  • Page 26 then hang up. Flash/Hook Toggles between active call and incoming call (call waiting tone). If not in conversation, flash/hook will switch to a new channel for a new call. Pressing pound sign will serve as Re-Dial key. FIRMWARE VERSION 1.0.7.3 HT70X USER MANUAL Page 24 of 52...

  • Page 27: Configuration Guide

    CONFIGURATION GUIDE CONFIGURING THE HT70X THROUGH VOICE PROMPTS DHCP M Select voice menu option 01 to enable HT70X to use DHCP. STATIC IP M Select voice menu option 01 to enable HT70X to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively.

  • Page 28: Important Settings

    “ADVANCED SETTING”, “FXS PORTs” configuration pages. Please reference the GUI pages using the following link: http://www.grandstream.com/products/ht_series/ht701/documents/ht70x_gui.zip NOTE: If you cannot log into the configuration page by using the default password, please check with the VoIP service provider. It is most likely the VoIP service provider has provisioned the device and configured for you therefore the password has already been changed.

  • Page 29: Dtmf Methods

    2. Use Random SIP/RTP Ports (under Advanced Settings webpage) This setting depends on your network settings. Generally if you have multiple IP devices under the same network, it should be set to Yes. If using a Public IP address, set this parameter to No. 3.
  • Page 30 DHCP mode: all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory.) The HT701 acquires its IP address from the first DHCP server it discovers from the LAN it is connected. Using the PPPoE feature: set the PPPoE account settings.

  • Page 31: Table 9: Status Page

    Allow DHCP server to Default Yes. Let the DHCP server handle the Time Zone set Time Zone Language Languages supported with voice prompt and web interface, except Spanish that it is only in IVR. Reset Type Gives the user the option to set to default all VoIP related configuration (mainly everything located on FXS/Profile page), all ISP (Internet Service Provider) configuration which may affect the IP address, or both at the same time.

  • Page 32: Table 10: Advanced Settings

    Advanced User configuration includes the end user configuration and the advanced configurations including: a) SIP configuration, b) Codec selection, c) NAT Traversal Setting and d) other miscellaneous configuration. HT701 and HT702 FXS SIP account(s) have its own configuration page. HT704 has two (2) profiles for the four (4) FXS ports.
  • Page 33 Use STUN to detect Use STUN keep-alive to detect WAN side network problems. If keep-alive request does network connectivity not yield any response for configured number of times, the device will restart the TCP/IP stack. If the STUN server does not respond when the device boots up, the feature is disabled.
  • Page 34 Information without server sending authentication challenge. Firmware File Prefix Default is blank. If configured, HT701 will request firmware file with the prefix. This setting is useful for ITSPs. End user should keep it blank. Firmware File Postfix Default is blank. End user should keep it blank.
  • Page 35 Connection Request Set a user name for the ACS to connect to this device Username Connection Request Set a password for the ACS to connect to this device Password CPE SSL Certificate The Cert File for the phone to connect to the ACS via SSL. CPE SSL Private Key The Cert Key for the phone to connect to the ACS via SSL.
  • Page 36 The IP address or URL of System log server. This feature is especially useful for the ITSP (Internet Telephone Service Provider) Syslog Level Select the HT701 to report the log level. Default is NONE. The level is one of EXTRA DEBUG, DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events: 1.

  • Page 37: Table 11: Account Settings

    Default is 1812. Specifies the port to be used for the Primary RADIUS Authentication. Primary RADIUS Auth HT704 Only Port Default is 1813. Specifies the port to be used for the Primary RADIUS Account. HT704 Primari RADIUS Acct Only Port Specifies the secret string to be used to authenticate the RADIUS connection to the Primary RADIUS Primary Server.
  • Page 38 SIP User ID User account information, provided by VoIP service provider (ITSP). Usually in the form of digit similar to phone number or actually a phone number. HT701 and HT702 only Authenticate ID SIP service subscriber’s Authenticate ID used for authentication. Can be identical to or different from SIP User ID.
  • Page 39 Unregister on Reboot Default is No. If set to Yes, the SIP user’s registration information will be cleared on reboot. Outgoing Call without Default is No. If set to “Yes,” user can place outgoing calls even when not registered (if Registration allowed by Internet Telephone Service Provider) but is unable to receive incoming calls.
  • Page 40 Disable Bellcore Style Default is No. you can make a Conference by pressing ‘Flash’ key. If set to Yes, you 3-Way Conference need to dial *23 + second callee number. Remove OBP from Default is No. When option YES is chosen, the Out Bound Proxy will be removed from Route Header Route header.
  • Page 41 Only the user part of a SIP address needs to be entered here. The HT70X will automatically append the “@” and the host portion of the corresponding SIP address. HT701 and HT702 only Offhook Auto-Dial The auto-dial delay after off hook.
  • Page 42 Offhook Tone left off-hook for an extended period of time. Disable Reminder Ring Default is No. Do not play the reminder ring when this is set to Yes. for On-Hold Call Disable Visual MWI Default is No. If set to “Yes”, the MWI information will not be transferred to the analog phone connected to the FXS port.
  • Page 43 • xx+ - at least 2 digits number; • xx. – at least 2 digit number. • ^ - exclude; • [3-5] - any digit of 3, 4, or 5; • [147] - any digit 1, 4, or 7; • <2=011> - replace digit 2 with 011 when dialing •...
  • Page 44 Anonymous Call Default is No. If set to Yes, incoming calls with anonymous Caller ID will be rejected Rejection with 486 Busy message. Special Feature Default is Standard. Choose the selection to meet some special requirements from Softswitch vendors. Session Expiration Grandstream implemented SIP Session Timer.
  • Page 45 Vocoder is entered by choosing the appropriate option in “Choice 1”. The last Vocoder is entered by choosing the appropriate option in “Choice 8”. Vocoder types can also be changed per call basis by using a star code. Please see the “Call features”...

  • Page 46: Table 12: Ht704 Fxs Ports Settings

    unwanted activation of the Flash/Hold and automatic phone ring-back, adjust this time value. Default values are 300 minimum and 1100 maximum. HT70X supports a range from 40 to 2000 ms. On Hook Timing On-hook timing is the minimum time for an on-hook event to be validated. Default value is 400 .

  • Page 47: Saving The Configuration Changes

    Name Any name to identify this specific user. Profile ID Select the corresponding Profile ID between Profile 1 and Profile 2. Hunting Group This feature enables the HT704 to register all existing FXS ports with the same phone number. Each incoming call will be routed to first available port in Linear or Circular mode.

  • Page 48: Rebooting The Ht70X From Remote

    REBOOTING THE HT70X FROM REMOTE Press the “Reboot” button at the bottom of the configuration menu to reboot the ATA remotely. The web browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in again.

  • Page 49: Software Upgrade

    SOFTWARE UPGRADE Software upgrade can be done via either TFTP or HTTP. The corresponding configuration settings are in the ADVANCED SETTINGS configuration page. FIRMWARE UPGRADE THROUGH TFTP/HTTP/HTTPS To upgrade via TFTP or HTTP/HTTPS, the “Firmware Upgrade and Provisioning upgrade via” field needs to be set to TFTP HTTP or HTTPS, respectively.

  • Page 50: Instructions For Upload From Local Directory

    1. Unzip the file and put all of them under the root directory of the TFTP server. 2. Put the PC running the TFTP server and the HT701 device in the same LAN segment. 3. Please go to File -> Configure -> Security to change the TFTP server's default setting from "Receive Only"...

  • Page 51: Firmware And Configuration File Prefix And Postfix

    file. It needs to be set to a valid URL, either in FQDN or IP address format. The “Config Server Path” can be same or different from the “Firmware Server Path”. A configuration parameter is associated with each particular field in the web configuration page. A parameter consists of a Capital letter P and 1 to 3 (Could be extended to 4 in the future) digit numeric numbers.
  • Page 52 Automatic Upgrade: Yes, every minutes(60-5256000). Yes, daily at hour (0-23). Yes, weekly on day (0-6). FIRMWARE VERSION 1.0.7.3 HT70X USER MANUAL Page 50 of 52...

  • Page 53: Restore Factory Default Setting

    RESTORE FACTORY DEFAULT SETTING WARNING! Restoring the Factory Default Setting will DELETE all configuration information of the phone. Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will not take any responsibility if you lose all the parameters of setting and cannot connect to your VoIP service provider.

  • Page 54: Firmware Version 1.0.7.3 Ht70X User Manual

    2222 33 (press the “3” key twice, “D” will show on the LCD) 3333 For example: if the MAC address is 000b8200e395, it should be keyed in as “0002228200333395”. RESET FROM WEB INTERFACE (RESET TYPE) 1. From the Advanced Settings Page user can select three types: •...

This manual is also suitable for:

Ht704Ht702

Table of Contents