Grandstream Networks HT701 User Manual page 51

Otherwise, the call will likely be rejected by the proxy (with a 404 Not Found
error).
This feature does NOT work with and should NOT be enabled for direct IP-to-
IP calling.
Dial Plan Prefix Sets the prefix added to each dialed number.
Use # as Dial Key Default is Yes. It allows users to configure the "#" key as the "Send" (or "Dial")
key.
essentially equivalent to the "Dial" key.
included as part of number.
Dial Plan Rules:
Dial Plan
1.
2.
Example of a simple dial plan used in a Home/Office in the US:
If set to "Yes", "#" will send the number.
Accept Digits: 1,2,3,4,5,6,7,8,9,0 , *, #, A,a,B,b,C,c,D,d
Grammar: x - any digit from 0-9;
•
xx+ - at least 2 digits number;
•
xx. – at least 2 digit number.
•
^ - exclude;
•
[3-5] - any digit of 3, 4, or 5;
•
[147] - any digit 1, 4, or 7;
•
<2=011> - replace digit 2 with 011 when dialing
•
< =1> - add a leading 1 to all numbers dialed, vice versa
will remove a 1 from the number dialed
•
| - or
• Example 1: {[369]11 | 1617xxxxxxx} – Allow 311, 611, 911, and any 11
digit
numbers with leading digits 1617
Example 2: {^1900x+ | <=1617>xxxxxxx} – Block any number of
•
leading digits 1900 and add prefix 1617 for any dialed 7 digit numbers
• Example 3: {1xxx[2-9]xxxxxx | <2=011>x+} –Allow any combinations of
numbers with 11 digits which has a leading digit 1, but 5th digit cannot
be 0 or 1. Or any length of numbers with a minimum of 2 digits beginning
with 2, with the leading digit replaced with 011.
1. Default: Outgoing - {x+}
HT70X User manual
Version 1.0.9.4
In this case, this key is
If set to "No", this "#" key can be
P a g e | 50