Advanced Settings; Table 8: Advanced Settings - Grandstream Networks HT813 Administration Manual

https://arttel.ru/
Unconditional Call
Forward to PSTN
Unconditional Call
Forward to VoIP
Advanced Settings Page Definitions

Advanced Settings

New Admin Password
Confirm Admin Password
Layer 2 QoS
Black List for WAN Side Port It could be either port range or single port separated by a ","
STUN Server
Keep-alive Interval
https://arttel.ru/shop/voip-shlyuzy/grandstream-ht-813
VoIP calls will be forwarded to the specified PSTN number.
Specify PSTN number.
Incoming PSTN calls will be forwarded to the VoIP number.
Specify "User ID", "SIP Server" and "SIP Destination Port"

Table 8: Advanced Settings

Defines the administrator level password to access the Advanced Web
Configuration page. This field is case sensitive. Only the administrator can
configure the "Advanced Settings" page. Password field is purposely left
blank for security reasons after clicking update and saved.
The maximum password length is 30 characters.
Re-enter the admin password to confirm change admin password on web
GUI to avoid typo or mistakes.
Sets values for:
802.1Q/VLAN Tag. Default is 0. Valid range is 0-4094.
SIP 802.1p. Default is 0. Valid range is 0-7.
RTP 802.1p. Default is 0. Valid range is 0-7.
Example: "5000-6000, 7000 ".
Configures IP address or domain name of STUN server. Only non-symmetric
NAT routers work with STUN.
Sends periodically a blank UDP packet to SIP server in order to keep the
"ping hole" on the NAT router open. Default is 20 seconds.
HT813 Administration Guide
Version 1.0.1.2
P a g e | 30