Grandstream Networks HT701 User Manual page 46
Analog telephone adaptors
Hide thumbs
Also See for HT701:
- User manual (54 pages) ,
- Configuration manual (8 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Reregister before
Default is 0 (function disabled). If configured with none 0 value. Then this
Expiration
parameter will specify the time that HT70X refreshes its registration before
expired, instead of the default refresh time interval before expiration, which is
half of the Register Expiration time or 10min maximum.
SIP Registration
Retry registration if the process failed. Default is 20 seconds.
Failure Retry Wait
Time
SIP Registration
Retry registration if the process failed upon 403 forbidden.
Failure Retry Wait
Default is 1200, valid value is between 0-3600. 0 means stop retry registration
Time upon 403
upon 403 response.
Forbidden
Enable SIP OPTIONS
Default is No. If set to Yes, it will use SIP OPTIONS instead of STUN as keep
Keep Alive
alive messages.
SIP OPTIONS Keep
Configure the Interval time of SIP OPTIONS keep-alive messages. Between 1
Alive Interval
- 64800 seconds. Default is 30.
SIP OPTIONS Keep
Configure the number of max lost packets for SIP OPTIONS Keep Alive before
Alive Max Lost
re-registration. Between 3 - 10 packets, default is 3.
Layer 3 QoS
Input value for SIP DSCP (Diff-Serv value in decimal, default 24)
And value for RTP DSCP (Diff-Serv value in decimal, default 46)
Local SIP port
Defines the local SIP port the HT70X will listen and transmit. The default value
for FXS port is 5060.
Local RTP port
Defines the local RTP-RTCP port pair the HT70X will listen and transmit. It is
the base RTP port for channel 0. When configured,
channel 0 uses this port _value for RTP and the port_value+1 for its RTCP
The default value for FXS port is 5004.
Use Random SIP
Default is No. This parameter forces the random generation of The local SIP
Port
ports when set to Yes. This is usually necessary when multiple HT70X are
behind the same NAT.
Use Random RTP
Default is No. This parameter forces the random generation of the local RTP
Port
ports when set to Yes. This is usually necessary when multiple HT70X are
behind the same NAT.
HT70X User manual
Version 1.0.9.4
P a g e
| 45
Hide quick links:
Advertisement
Table of Contents
