Grandstream Networks HT701 User Manual page 50

Disable Call Waiting Default is No. This is to disable the stutter Call Waiting Tone when a Call Waiting
Tone information arrives. The CWCID information will still be displayed.
Disable Connected Default is No. If set to Yes will disable the connect line ID appear on device.
Line ID
Disable Receiver Default is No. If set to Yes, it will disable the warning to alert that the phone has
Offhook Tone been left off-hook for an extended period of time.
Disable Reminder Default is No. Do not play the reminder ring when this is set to Yes.
Ring for On-Hold Call
Disable Visual MWI Default is No. If set to "Yes", the MWI information will not be transferred to the
analog phone connected to the FXS port.
Ring Timeout Default value is 60 Sec. Incoming call will stop ringing when not picked up given
a specific period of time.
Hunting Group Ring Default value is 20 Sec. If call is not answered within this designated time period,
Timeout the call will be forwarded to the next member of a Hunt Group. HT704 only.
Hunting Group Type Linear and Circular. Default is Circular. Linear style will sort the call to the
lowest-numbered available line, this is also called "serial hunting". Circular style
will distribute the calls "round-robin". If a call is assigned to line 1, the next call
goes to 2 and the next to 3.
The succession throughout each of the lines continues even if one of the
previous lines becomes available. When the end of the hunt group is reached,
the hunting starts over at the firstline. Lines are skipped if they are still busy on
a previous call. HT704 only
Delayed Call Forward Default value is 20 seconds. In case this feature activated using * codes (*92
Wait Time code), the call will be forwarded after this preconfigured amount of time.
No Key Entry Default is 4 seconds. Dialing process is completed and outgoing call is initiated
Timeout if no key entry occurs during this preconfigured interval.
Early Dial Default is No. Use only if proxy supports 484 response.
controls whether the phone will send an early INVITE each time a key is pressed
when a user dials a number. If set to "Yes", an INVITE is sent using the dial-
number collected thus far; Otherwise, no INVITE is sent until the "(Re-)Dial"
button is pressed or after about 5 seconds have elapsed if the user forgets to
press the "Re-Dial" button.
The "Yes" option should be used ONLY if there is a SIP proxy configured and
the proxy server supports 484 Incomplete Address response.
HT70X User manual
Version 1.0.9.4
This parameter
P a g e | 49