Grandstream Networks HT701 User Manual page 43

Set the IP or FQDN of the Primary RADIUS Server. HT704 Only
Remote Authentication Dial In User Service (RADIUS). HT704 supports RADIUS
for authentication, authorization and billing purposes. Primary and secondary
RADIUS server configurations are available to provide redundancy to this feature.
Primary RADIUS In case Primary Radius server becomes unusable, RADIUS requests will be
Server automatically sent to the secondary server. When at least one RADUIS server was
configured, the device will allow users to make phone calls only after authorization
from RADIUS server has been received. CDR (Call Detail Record) is also sent to
the RADIUS server for billing purposes. RAIDUS server can send requests to
terminate calls when run out of pre-paid credit.
Default is 1812. Specifies the port to be used for the Primary RADIUS
Primary RADIUS
Authentication. HT704 Only
Auth Port
Default is 1813. Specifies the port to be used for the Primary RADIUS Account.
Primari RADIUS
HT704 Only
Acct Port
Specifies the secret string to be used to authenticate the RADIUS connection to
Primary RADIUS
the Primary Server. It should match RADIUS configuration. HT704 Only
Server Secret
Set the IP or FQDN of the Secondary RADIUS Server. HT704 Only
Secondary RADIUS
In case Primary Radius server becomes unusable, secondary will take role of
Server
primary and will manage credit recourses in the network
Default is 1812. Specifies the port to be used for the Secondary RADIUS
Secondary RADIUS
Authentication. HT704 Only
Auth Port
Default is 1813. Specifies the port to be used for the Secondary
Secondary RADIUS
Account. HT704 Only
Acct Port
Specifies the secret string to be used to authenticate the RADIUS connection to
Secondary RADIUS
the Secondary Server. It should match RADIUS configuration HT704 Only
Server Secret
Default is 2. HT704 Only
RADIUS Timeout
Default is 3. HT704 Only
RADIUS Retry
HT70X User manual
Version 1.0.9.4
RADIUS
P a g e | 42