Configuring The Ht70X Through Voice Prompts; Table 8: Basic Settings - Grandstream Networks HT701 User Manual
Analog telephone adaptors
Hide thumbs
Also See for HT701:
- User manual (54 pages) ,
- Configuration manual (8 pages) ,
- Quick start manual (4 pages)
Table of Contents
Advertisement
Configuring the HT70X through Voice Prompts
As mentioned previously, The HT70X has a built-in voice prompt menu for simple device configuration.
Please refer to
"Understanding HT70X Interactive Voice Prompt Response
about IVR and how to access its menu.
• DHCP MODE
Select voice menu option 01 to allow the HT70X to use DHCP.
• STATIC IP MODE
Select voice menu option 01 to allow the HT70X to enable the STATIC IP mode, then use option 02, 03,
04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively.
• FIRMWARE SERVER IP ADDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
• CONFIGURATION SERVER IP ADDRESS
Select voice menu option 14 to configure the IP address of the configuration server.
• UPGRADE PROTOCOL
Select the menu option 15 to choose firmware and configuration upgrade protocol between TFTP, HTTP
and HTTPS.
• FIRMWARE UPGRADE MODE
Select voice menu option 17 to choose firmware upgrade mode among the following three options:
"Always check, check when pre/suffix changes, and never upgrade".
End User Password
Web Port
Telnet Server
HTTP Access
Table 8: Basic Settings
Password to access the Web Configuration Menu. This field is case sensitive
with a maximum length of 25 characters.
By default, HTTP uses port 80. This field is for customizable web port.
Default is set to Yes.
Default is set to Yes. If set to No, http access will be denied.
HT70X User manual
Version 1.0.9.4
Menu" for more information
P a g e
| 32
Hide quick links:
Advertisement
Table of Contents
