Grandstream Networks HT701 User Manual page 49

Offhook Auto-Dial The auto-dial delay after off hook.
Delay
Proxy-Require SIP Extension to notify SIP server that the unit is behind the NAT/Firewall.
Use NAT IP NAT IP address used in SIP/SDP message. Default is blank.
Use SIP User-Agent Configurable SIP User-Agent Header.
Header
Do Not Escape '#' If set to Yes, device will use '#' instead of '%23' in the send URI.
as %23 in SIP URI
Disable Multiple m Default is No. If set to Yes, device will send only one m line in SDP, regardless
line in SDP how many m field in the incoming SDP.
Distinctive Ring Tone Custom Ring Tone 1 to 3 with associate Caller ID: when selected, if Caller ID is
configured, then the device will ONLY uses this ring tone when the incoming call
is from the Caller ID. System Ring Tone is used for all other calls.
When selected but no Caller ID is configured, the selected ring tone will be used
for all incoming calls using the FXS port or Profile. Distinctive ring tones can be
configured not only for matching a whole number, but also for matching prefixes.
In this case symbol * (star) will be used.
For example:
area code 617. Any other incoming call will ring using cadence defined in
parameter System Ring Cadence located under Advanced Settings
Configuration page.
Note: If server supports Alert-Info header and standard ring tone set (Bellcore)
or distinctive ring tone 1-10 is specified, then the ring tone in the Alert-Info
header from server will be used. Bellcore rings and tones are independent from
custom ring tones. The custom ring tones can also be specified by alert-info
header, for example:
Alert-Info: <http://127.0.0.1>;info=ring5
Disable Call Waiting Default is No. If set to Yes Call Waiting indication information will not be provided
to analog phone connected to this FXS port.
Disable Call-Waiting Default is No. If set to Yes Call Waiting caller ID will not be provided to analog
Caller ID phone connected to this FXS port.
if configured as *617, Ring Tone 1 will be used in case of call arrived from the
HT70X User manual
Version 1.0.9.4
P a g e | 48