Grandstream Networks HT701 User Manual page 56

Disable Network Default is No.
Echo Suppressor If set to "Yes" NEC will be disabled per call base. Recommended for FAX/Data
calls.
Outgoing Call Configure the time limitation of outgoing calls. 0-180 minutes, default is 0 (No
Duration Limit Limit).
Ring Frequency Configure ringing frequency for your phone. 15-60 Hz, default is 20 Hz.
Enable High Ring Default is No.
Power If it has difficulties to ring the FAX machine or phone. Enable to push higher ring
power through FXS port.
Ring Tones This function lets you configure ring tone cadence preferences. User has 10
choices.
The configuration, completed in Distinctive Ring Tones block in the same page,
applies to ring tones cadences configured here.
SIP Use ID User account information, provided by VoIP service provider (ITSP). Usually in
the form of digit similar to phone number or actually a phone number.
Authenticate ID SIP service subscriber's Authenticate ID used for authentication. Can be
identical to or different from SIP User ID.
Password SIP service subscriber's account password for HT704 to register to (SIP)
servers of ITSP.
Name Any name to identify this specific user.
Profile ID Select the corresponding Profile ID between Profile 1 and Profile 2.
Hunting Group This feature enables the HT704 to register all existing FXS ports with the
same phone number.
Each incoming call will be routed to first available port in Linear or Circular
mode.
User may configure all ports as members of the same Hunting Group or it may
configure different port combinations for more than one Hunting Group. For
example:
Ports 1, 3 and 5 are members of the same Hunting Group, the rest of the ports
may have separate numbers and may be reached independently.
Any port, member of a Hunting Group that is not registered with a SIP
account, will be able to place outbound calls using the SIP credentials of the
primary Hunting Group port.
HT70X User manual
Version 1.0.9.4
P a g e | 55