Grandstream Networks HT701 User Manual page 35

Self-Defined Time
Zone
Allow DHCP server to
set Time Zone
Language
Reset Type
In addition to the Basic Settings configuration page, end users also have access to the Device Status page.
The syntax is std offset dst [offset],start[/time],end[/time]
Default is set to : MTZ+6MDT+5,M3.2.0,M11.1.0
MTZ+6MDT+5,
Time zone with 6 hours offset with 1 hour ahead which is the US central time. It
is positive (+) if the local time zone is west of the Prime Meridian and negative (-)
if it is east.
Prime Meridian (a.k.a: International or Greenwich Meridian)
M3.2.0,M11.1.0
The 1 st number indicates Month: 1,2,3,..,12 (for Jan, Feb, .., Dec)
The 2 nd number indicates the n
Tuesday etc)
The 3 number indicates Weekday: 0,1, 2, ..,6(for Sun, Mon, Tue, .., Sat)
rd
Therefore, this example is the DST which starts from the second Sunday of March
to the 1st Sunday of November.
Default Yes. Let the DHCP server handle the Time Zone
Languages supported with voice prompt and web interface, except Spanish that
it is only in IVR.
Gives the user the option to set to default all VoIP related configuration (mainly
everything located on FXS/Profile page), all ISP (Internet Service Provider)
configuration which may affect the IP address, or both at the same time.
Note: After you choose the reset type, you will have to click the reset button for it
to take effect.
HT70X User manual
Version 1.0.9.4
th iteration of the weekday: (1st Sunday, 3rd
P a g e | 34