Magnetek Elevator HPV1000 AC Technical Manual page 82

8 Appendix
WARNING! Electrical Shock Hazard. The motor must be at a complete stop before performing any maintenance, inspection, or wiring.
• With a PM motor, drive output must be fully interrupted when the power is shut off and the motor is still
rotating.
Failure to comply can result in personal injury from electrical shock.
Drive Label Warnings
Always heed the warning information listed in
Figure 13
Figure 14
80
Figure 16 in the position shown in
WARNING
Risk of electric shock.
Read manual before installing.
●
Wait 5 minutes for capacitor
●
discharge after disconnecting
power supply.
To conform to
●
make sure to ground the supply
neutral for 400V class.
After opening the manual switch
●
between the drive and motor,
please wait 5 minutes before
inspecting, performing
maintenance or wiring the drive.
Hot surfaces
Top and Side surfaces may
●
become hot. Do not touch.
Figure 16 Warning Information
Figure 17 Warning Information Position
Figure
requirements,
MAGNETEK HPV1000 AC Elevator Drive Technical Manual
17.