Magnetek Elevator HPV1000 AC Technical Manual page 14

4 Keypad Operation
Navigation at the Entry Level
To access the entry level from the sub-menu level, press the "ENTER" key on the parameter while it is being displayed.
While in the entry level, the text "Ent" will be displayed in between the arrows on the screen as shown in
the entry level, the functions of the keys are redefined. The "ESCAPE" key remains as the key used to move back to the
higher level (in this case to the sub-menu level). The left and right arrow keys are used as cursor positioning keys and the
up and down arrow keys are used as increment and decrement keys.
Figure 4
-INFO-
D0 DISPLAY 2
D1 ELEVATOR DATA
READY/RUN
ESC
D1
Speed Command
- - - - - - - - - - - - - - - - - - - - -
D1
Speed Reference
- - - - - - - - - - - - - - - - - - - - -
-INFO-
D0 DISPLAY 2
D2 POWER DATA
12
<
>
ENTER
<
0.0 m/s
>
SUB
0.0 m/s
SUB
<
>
Figure 7 Operator Navigation
<
-INFO-
A0 ADJUST
A1 DRIVE
ENTER
READY/RUN
ESC
<
A1
Contract Car Spd
2.0 m/s
- - - - - - - - - - - - - - - - - - - - -
SUB
ENTER
READY/RUN
ESC
A1
Contract Car Spd
m/s
2.0
- - - - - - - - - - - - - - - - - - - - - - -
Min: 0.0
Max: 3000.0 <400.0>
Ent
-INFO-
A0 ADJUST
A1 DRIVE
-INFO-
C0 CONFIGURE
C1 USER SWITCHES
>
ENTER
READY/RUN
ESC
C1
Spd Command Src
Multi-Step Speed
- - - - - - - - - - - - - - - - - - - - -
>
SUB
ENTER
READY/RUN
ESC
C1
Spd Command Src
Multi-Step Speed
- - - - - - - - - - - - - - - - - - - - - - -
Now: 0, Sel: 0
Default: < 0 >
Ent
-INFO-
C0 CONFIGURE
C2 LOGIC INPUTS
MAGNETEK HPV1000 AC Elevator Drive Technical Manual
Figure 7. At