Bdcom S1518-16P-330 User Manual page 9

• LED Indicator
LED Color
PWR Green
LNK/ACT Green
Speed Green
PoE Orange
Rear panel
• Power socket
Connect the female connector of the power cord here, and the male connector to the
AC (Alternating Current) power outlet. Please make sure the voltage of the power supply
meets the requirement of the input voltage.
• Grounding Terminal
The switch already comes with lightning protection mechanism. You can also ground
the switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
Caution： Please use the original power cord, ensure electrical socket
Off: No Power supply.
Light: Indicates the switch has power.
Off: No device is connected to the corresponding port.
Light: Indicates the link through that port is successfully
established at 10/100/1000Mbps.
Blink: Indicates that the Switch is actively sending or
receiving data over that port.
Off: Indicates the link through established at 10Mbps.
Light: Indicates the link through established at 1000Mbps.
Blink: Indicates the link through established at 100Mbps.
Off: No PoE powered device (PD) connected.
Light: There is a PoE PD connected to be port, which
supply power successfully.
Blink: Indicates port abnormal power supply.
100~240V AC
50/60Hz
S1210-8P-150
S1218-16P-330/S1226-24P-330
and device properly grounded.
Description
Fan
1
Grounding Terminal
2
Power Socket
3
Grounding Terminal
2
Power Socket
3
100~240V AC 50/60Hz