Product Appearance - Bdcom S1518-16P-330 User Manual

Disclaimer
Please note that the manual shown here are for reference purposes only. It does not constitute a legal
contract or a commitment between BDCOM and any person or entity.Although every effort has been
made to ensure all the information in this manual is correct,inaccuracies or typographical errors may
still occur. In no event shall BDCOM be responsible or liable, directly or indirectly, for any damage or
loss caused or alleged to be caused by or in connection with the manual.
BDCOM reserves the right to alter, update and otherwise change the information contained in the
manual from time to time without notice.
Introduction
Overview
S1510-8P-150/S1518-16P-330/S1526-24P-400 are Ethernet switch. The PoE ports can automatically
detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PD). The power is
transmitted along with data in one single cable allowing you to expand your network where there are no
power lines or outlets, where you wish to fix devices such as AP, IP Cameras or IP Phones, etc.
The PoE Switch have VLAN function that improve the network environment and reduces network maintenance
costs.
Port Feature
Model 10/100/1000Mbps RJ45 Port
S1510-8P-150
S1518-16P-330
S1526-24P-400

Product Appearance

Front panel
The Front Panel of the S1510-8P-150 Consists of 10-Port 10/100/1000M Auto-Negotiation
Ethernet RJ45 Ports. The LED indicators also on located on the panel.
The Front Panel of the S1518-16P-330 Consists of 16-Port 10/100/1000M Auto-Negotiation
Ethernet RJ45 Ports, 2-Port Gigabit SFP slot. The LED indicators also on located on the panel.
Port status indicator
DIP switch
16*10/100/1000Mbps PoE Port
2*1000Mbps SFP slots
10
16
24
Default
VLAN
CCTV
DIP switch
Port status indicator
8*10/100/1000Mbps PoE Port
2*10/100/1000Mbps RJ45
10/100M 1000M
Gigabit SFP Port
—
2
2
10/100M 1000M
Default
VLAN
CCTV
PoE Port PoE Standard
Port1~8
IEEE802.3af/at
Port1~16
Port1~24