Connections - KING One Pro KOP4800 Owner's Manual

Connect components in following order.
A Connect coax cables.
Power inserter is for indoor use only.
Place the power inserter in an accessible location .
Do not over-tighten the coax connections .
Do not put sharp bends or kinks in the cables .
Do not route the cables where they can be tripped on
or run over by a vehicle .
NOTE: If your main receiver has two SAT IN ports: AUX coax may be
connected to second SAT IN port for dual tuner usage .
AUX MAIN
A
50' Coax
A
Coax sold separately
After connecting and plugging in all components, wait for the power inserter
LED to start flashing orange (about 10 seconds).
Go to the next page.

CONNECTIONS

B Plug in power inserter.
110 AC/DC
Power Supply
B
Button LED
ANT REC
Short
KING Power
Coax
Inserter
C Plug in receiver(s).
HAND-TIGHTEN COAX.
OVER-TIGHTENING CAN
DAMAGE CONNECTIONS.
Receivers sold separately
SAT IN
MAIN Receiver
A
SAT IN
Optional AUX
C
110 AC
C
110 AC
Receiver
To TV
To TV
KC1187
Page 5