Troubleshooting - KING One Pro KOP4800 Owner's Manual

For use with bell tv satellite programming
Hide thumbs Also See for One Pro KOP4800:
Table of Contents

Advertisement

Symptom
Antenna unit does not scan
for satellites .
Antenna unit scans but no
picture on TV .
Antenna unit scans but does
not find satellite.
Picture on TV goes in and out . Temporary obstruction of signal . Heavy rain or snow may cause loss of signal .
If you connect or install the antenna unit using any of the vehicle's internal wiring/coax, and the antenna unit does
not work properly, it could be the vehicle's wiring/coax . Connect a known good coax directly from the antenna unit
to the power inserter and see if the problem goes away . If it does, the vehicle's wiring/coax is at fault . KING is not
responsible for faulty vehicle wiring/coax .
Page 14

TROUBLESHOOTING

GENERAL
Possible Cause
No power to antenna unit .
Improper connections made .
Line of sight obstruction .
Troubleshooting
Make sure antenna unit is connected to power
inserter .
Make sure power supply is plugged in and connected
to power inserter .
Make sure antenna unit is connected to power
inserter, and power inserter is plugged in .
Make sure powered receiver is connected to TV and
the power inserter .
Move antenna unit to have a clear view of the
southern sky . Start a new scan .
Reception will improve as weather clears .
Make sure nothing is temporarily blocking view to the
southern sky (like tree branches blowing in the wind) .

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents