INITIAL SETUP FOR SECOND RECEIVER
1 . With the antenna locked on the satellite
and the second receiver connected to the
antenna unit's AUX port coax, use your
receiver's remote control and press
MENU, 6, 1, 1 to display the Point Dish screen .
2 . Use the arrow buttons on the remote
to highlight "Check Switch ."
Press SELECT on your remote .
3 . Verify "SuperDISH" and "Alternate"
are not selected .
Verify "Test" is highlighted .
Press SELECT on your remote .
4 . When test is complete, highlight "Save ."
Press SELECT on your remote .
See the next page for downloading programming to the second receiver.
Page 12
SECOND RECEIVER OPERATION
Antenna locked on
and
receiver connected!
Receiver sold separately .