Scan For Satellites - KING One Pro KOP4800 Owner's Manual

For use with bell tv satellite programming
Hide thumbs Also See for One Pro KOP4800:
Table of Contents

Advertisement

4
KC1216
GR
GR
SOLID GREEN
If both satellites were found, go to page 10 and run the check switch.
If one or both satellites were not found, you will get one of the flash
patterns shown on the next page.
If only one satellite was found, you can still run the check switch on page 10,
but you will have fewer available channels when it is complete .
Many times lack of satellite acquisition
is due to obstructions . Try moving the
antenna to have a better view of the
southern sky and press the button to
start a new scan .
NOTE: If no satellites are found, you
will have to start a new scan .
If you get a different color and/or flash pattern on the LED than steady green or one of the patterns shown on the next
page, the LED is flashing an error code. Call KING Customer Service for an explanation of the problem.
Page 8

SCAN FOR SATELLITES

Press and release the power inserter button to start a scan
Antenna is scanning (flashing green)
GR
Both satellites found
(952) 345-8147
KC1192

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents