Connections - KING One Pro KOP4800 Owner's Manual

Connect components in following order.
A Connect coax cables.
Power inserter is for indoor use only.
Place the power inserter in an accessible location .
Do not over-tighten the coax connections .
Do not put sharp bends or kinks in the cables .
Do not route the cables where they can be tripped on
or run over by a vehicle .
NOTE: If your main receiver has two SAT IN ports: AUX coax may be connected to
second SAT IN port for dual tuner usage .
AUX MAIN
A
50' Coax
A
Coax sold separately
After connecting and plugging in all components, wait for the power inserter
LED to turn steady green.
The Mobile Antenna Setup screen should appear on your TV.
Go to the next page.

CONNECTIONS

B Plug in power inserter.
110 AC/DC
Power Supply
B
Button LED
ANT REC
Short
KING Power
Coax
Inserter
C Plug in receiver(s).
Receivers sold separately
SAT IN
MAIN Receiver
A
SAT IN
Optional AUX
HAND-TIGHTEN COAX.
OVER-TIGHTENING CAN
DAMAGE CONNECTIONS.
C
110 AC
C
110 AC
Receiver
To TV
To TV
KC1187
Page 5