Table of Contents
Advertisement
When the Compact Processor is turned on for the first time
The ISDN Configuration (COUNTRY) menu appears on the
monitor screen after the self-diagnostic is completed.
Register your local system data on the ISDN Configuration
menus.
For details on the registration, see "Registering Local
Information" on page 60.
Sleep function
The Compact Processor is turned into sleep mode to save
power, if you do not operate the Compact Processor for about
10, 30, or 60 minutes.
The POWER lamp on the main unit flashes while in sleep
mode.
Once a call comes in, the sleep function is automatically
released.
To release the sleep function
Press any of the buttons on the Remote Commander.
To set the time that the unit turns into sleep mode
Set the time by setting SLEEP FUNCTION in the Other Setup
menu. If you do not want to use the sleep function, set SLEEP
FUNCTION to OFF.
For details on the SLEEP FUNCTION setting, see "Other
Setup menu" on page 84.
Notes
• The POWER lamp on the camera does not flash even if the
• A Sony TV monitor is turned into standby mode.
system is in sleep mode.
Chapter 1 Preparation
21
Advertisement
Table of Contents
