Table of Contents
Advertisement
1 POWER lamp (green)
When you set the POWER switch to
on, this lamp lights up. This lamp goes
off when the system is on standby, or
flashes when the system is in sleep
mode.
2 STANDBY lamp (orange)
This lamp lights up when the system
is on standby. This lamp goes off
when the system is in sleep mode.
3 IR (Infrared) sensor
Detects the infrared video signal
emitted from the optional PCS-
DS150/DS150P Document Stand. The
infrared video input via this sensor is
assigned as OBJECT.
4 Remote sensor
When operating the Compact
Processor with the Remote
Commander, point it toward this
sensor.
If you use this sensor, set IR
RECEIVER to Body in the Other
Setup (System Configuration) menu.
This is set to Main Camera at factory.
5 Memory slot cover
The following connector and the slot
is under the cover.
AUX CONTROL connector (D-
sub 9-pin, male): Connects with
external equipment for external
control of the Compact
Processor.
Memory card slot: An optional
memory card is inserted into this
slot.
Memory card eject button: Press
this button to eject the card.
6 Microphone
7 CAMERA connector
Connect to the camera.
113
Appendix
Advertisement
Table of Contents
