Checking The Connection Status - Sony PCS-1500 Operating Instructions Manual

Checking the Connection Status

During a meeting, you can check the status of the
communication. Elapsed time also appears on the monitor
screen during a meeting.
1
2
3
Press the MENU button on the Remote Commander.
The Menu (System Configuration) menu appears on the
monitor screen.
Select the COMMUNICATION with the joy stick, then
press it.
The Communication Status menu appears on the monitor
screen.
Communication Status
LINE I/F BRI
RATE 2 x 64K
(Encode) (Decode)
AUDIO MODE G. 728 G. 728
VIDEO MODE H. 261 H. 261
CIF CIF
FRAME RATE 15fps 15fps
Check the status:
LINE I/F: Displays the line interface being used.
RATE: Displays the number of lines and the transfer rate
being used.
CAMERA CONTROL: Displays the far end camera
control protocol.
DATA CONTROL: Displays the data transmission
protocol.
Chapter 2 Basic Operation During a Meeting
00:00
CAMERA CONTROL ON
DATA CONTROL T. 120
(Encode) (Decode)
LSD RATE 6400 6400
MLP RATE OFF OFF
HMLP RATE 62.4K 62.4K
Exit: CANCEL
(Continued)
37