Table of Contents
Advertisement
Checking the Connection Status
4
On elapsed time
When you set TIME to ON in the Other Setup menu, the
elapsed time appears on the monitor screen during a meeting.
You can use it as a guide, and it is convenient for checking
communication costs. If you do not need to display the elapsed
time, set TIME to OFF.
For details on the TIME setting, see "Other Setup menu" on
page 84.
38
Chapter 2 Basic Operation During a Meeting
The items below are separately displayed in the columns
Encode and Decode.
The columns Encode indicate the status being sent, the
columns Decode indicate the status being received.
AUDIO MODE: Displays the audio encoding system.
VIDEO MODE: Displays the video encoding system.
FRAME RATE: Displays the maximum frame rate of the
motion picture.
LSD RATE: Displays the LSD (Low Speed Data) rate.
MLP RATE: Displays the MLP (Multi Layer Protocol)
rate.
HMLP RATE: Displays the HMLP (High speed Multi
Layer Protocol) rate.
Press the CANCEL button on the Remote Commander
twice.
The menu disappears from the monitor screen.
Advertisement
Table of Contents
