Table of Contents
Advertisement
Upgrading the Software
4
5
6
7
8
9
10
11
Note
The memory card can be installed only once. The card which
has been already installed into another Compact Processor
cannot be used. Installed functions cannot be removed.
92
Chapter 5 Meetings With Optional Equipment
Turn on the Compact Processor.
The upgrade starts and the STANDBY lamp flashes. After
the upgrade is complete, the Compact Processor restarts.
Note
Do not turn off the power or eject the memory card before
verifying that the upgrade is complete in Step 7.
Press the MENU button on the Remote Commander.
The Menu (System Configuration) menu appears on the
monitor screen.
Select MACHINE with the joy stick, then press it.
The Machine Information menu appears on the monitor
screen.
Check that the system has been properly upgraded on the
Machine Information menu.
Turn off the Compact Processor.
Eject the memory card by pressing the eject button located
at the side of the MEMORY CARD slot.
Attach the cover.
Stick the serial number sticker to the bottom of the
Compact Processor.
Advertisement
Table of Contents
