Table of Contents
Advertisement
3
To see a picture of the selected terminal
1
2
Note
When you have not input the terminal number, a terminal
which has the lowest number is first selected, and each time
you press the VIEW SEL button, the picture is cyclically
switched from the one which has the low number.
1 Enters a terminal number from 1 to 99 in this box.
2 Displays the number of connected terminals from 1 to
99.
3 Displays a selected terminal number from 1 to 99;
"This terminal," "No one," or "Unidentified terminal."
4 Displays a broadcasted terminal number from 1 to 99;
"This terminal," "No one," or "Unidentified terminal."
Select the picture to be displayed or broadcast with the
MCU (Chair) Control menu.
Note
When you do an incapable operation, the indication
"Command is rejected by MCU" appears on the monitor
screen.
Enter the terminal number in the box 1 in the Chair
Control menu with the number buttons on the Remote
Commander.
Press the VIEW SEL button on the Remote Commander.
The picture of the selected terminal appears on the local
monitor.
The selected terminal number is displayed in the box 3.
Chapter 3 Advanced Operation
57
Advertisement
Table of Contents
