Maintenance; General Cleaning; General Care - LifeSpan TURBO PLUS User Manual

Reasonable cleaning/lubricating should be made to extend the life time of this unit.
Performance is maximized when the belt and mat are kept as clean as possible.
WARNING: THE MAT/DECK FRICTION MAY PLAY A MAJOR ROLE IN THE
FUNCTION AND LIFE OF YOUR TREADMILL AND THAT IS WHY WE RECOMMEND
YOU CONSTANTLY LUBRICATE THIS FRICTION POINT TO PROLONG THE USEFUL
LIFE OF YOUR TREADMILL. FAILING TO DO THIS MAY VOID YOUR WARRANTY.
WARNING: UNPLUG POWER CORD BEFORE MAINTENANCE.
WARNING: STOP TREADMILL BEFORE FOLDING.

4.1 General Cleaning

l Use a soft, damp cloth to wipe the edge of the belt and the area between the belt
edge and frame. A mild soap and water solution along with a nylon scrub brush will
clean the top of the textured belt. This task should be done once a month. Allow to
dry before using.
l On a monthly basis, vacuum underneath your treadmill to prevent dust build up.
Once a year, you should remove the black motor shield and vacuum out dirt that may
accumulate.

4.2 General Care

·
Check parts for wear before use.
·
Pay particular attention to the fixing knobs and make sure they are tight.
·
Always replace the mat if worn and any other defective parts.
·
If in doubt do not use the treadmill and contact our helpline.

4 MAINTENANCE

LIFESPAN TURBO PLUS Page 16