LifeSpan TURBO PLUS User Manual page 8

Step 5
Connect the cable to the display panel. Again this
is a very delicate procedure so take care when
undertaking this step. Then Slide the display
panel down gently to connect it to the upright
column posts. When completing this step, be
mindful of the cable and make sure it doesn't get
squashed (view right)
.
Step 6
Fix the display panel on both sides using (4x)
8mm bolts
Step 7
Install the pulse meter tube to the two upright
columns and fix it with (2x) 8mm bolts (view
right). Please note that the heart rate meter is
operated via independent AA batteries which need
to be installed.
Step 8
Go over the entire treadmill and ensure all fixings are tightly secured and the treadmill is
soundly constructed. Be sure to tighten the bolts mentioned in Step 4.
LIFESPAN TURBO PLUS Page 7