Advertisement
4K HDMI KVM USB/RS232/IR/Analog Audio CAT5e Extender over
ITEM NO:
HKM02BT-4K: 4K HDMI KVM over IP/Fiber - Transmitter
HKM02BR-4K: 4K HDMI KVM over IP/Fiber – Receiver
HKM02BPT-4K: 4K HDMI KVM over PoE - Transmitter
HKM02BPR-4K: 4K HDMI KVM over PoE – Receiver
HKM02BT: 1080p HDMI KVM over IP - Transmitter
HKM02BR: 1080p HDMI KVM over IP – Receiver
Features:
Extend and distribute 4K HDMI signal with USB, bi-directional RS232/IR, and analog audio signals over LAN.
Supports resolutions up to 4K@30Hz Ultra HD.
HDCP 2.2 compliant.
Transmission range up to 150M over CAT5e/CAT6.
Support SFP optical transceiver, single mode transmission distance up to 60KM.
Support Windows based management software, using PC for easy setting input/output link.
Support Android/iOS APP for channel select and management.
Support IR remote control or front panel button for channel select and management.
Support up to 8x16 video wall.
Support output resolution up/down scale: 2160p 30Hz input to 1080p 60Hz output.
Supports full duplex Bi-Directional RS232 communication (115200 MAX) by control software on a PC, or other
automated control system to control devices attached to the extenders.
Built in RS232 distribution function, to send RS232 signal from one TX to multiple RX.
RS232 port support external Keypad/Console control. (Custom made available)
Support Dolby TrueHD®, and DTS-HD Master™ ,LPCM audio up to 7.1 channels 192Khz
Built in Bi-Directional analog audio transmission (only in unicast mode).
Built in Bi-Directional IR extension.
HKM02BT-4K and HKM02BPT-4K Transmitter unit built in HDMI local loop output.
HKM02BR-4K and HKM02BPR-4K Receiver unit with 4 ports USB devices (2 port USB 1.1 front & 2 Port USB
2.0 rear), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
HKM02BPT-4K and HKM02BPR-4K support both 802.3af and power adaptor as power input.
Use IGMP and Jumbo frame protocol Gigabit Switch Hub to do HD signal distribution and transmission.
Support point to point and multiple source devices to multi-display connections via Gigabit network switch with
Unicast or Multicast mode.
Support total of transmitter unit up to 1000 pieces, receiver unit over 60000 pieces based on the number of
ports on your network switch.
Perfect for large scale remote HD content access and security monitoring systems, digital signage applications.
Option Model: 1U 19" Rack Mounting Panel
TPN002BT: to fit 2 pcs HKM02BT-4K. TPN003BT: to fit 3 pcs of HKM02BT.
IP Series
Advertisement
Table of Contents
Related Manuals for SC&T 4K HDMI KVM USB/RS232/IR/Analog Audio CAT5e Extender over IP Series
Summary of Contents for SC&T 4K HDMI KVM USB/RS232/IR/Analog Audio CAT5e Extender over IP Series
- Page 1 4K HDMI KVM USB/RS232/IR/Analog Audio CAT5e Extender over IP Series ITEM NO: HKM02BT-4K: 4K HDMI KVM over IP/Fiber - Transmitter HKM02BR-4K: 4K HDMI KVM over IP/Fiber – Receiver HKM02BPT-4K: 4K HDMI KVM over PoE - Transmitter HKM02BPR-4K: 4K HDMI KVM over PoE – Receiver HKM02BT: 1080p HDMI KVM over IP - Transmitter HKM02BR: 1080p HDMI KVM over IP –...
-
Page 2: Application View
Application View:... - Page 3 Panel View: Transmitter HKM02BT-4K/HKM02BPT-4K HKM02BT Receiver HKM02BR-4K/HKM02BPR-4K HKM02BR...
- Page 4 Panel Button Function: HKM02B-4K/HKM02BP-4K Button Menu Short Press Reduce Value Increase Value Press together Enter Menu/Cancel Press 3 seconds Carry Decomposition Press 6 seconds Lock/Unlock Button(When no OSD menu) Press and hold then power on Factory Default Engineering Mode Set Factory Default then enter Engineering Mode HKM02B Button - and + together...
- Page 5 System Warring, Alert LED Indication Status: Times HKM02B-4K MSG LED HKM02B IR LED Always IR control, RS232 control, system Transmitting/receiving IR signal setting Transmitters channel conflict DHCP server not found Rest to factory default Engineering mode Manufacture setting mode Aux system stopped Aux system firmware boot sector error Aux system firmware type error RJ45 LED Indication Status:...
-
Page 6: System Default Settings
Cable & Transmission Distance: Link Cable use high quality CAT.5e UTP/STP/FTP or CAT.6 UTP cable Transmission distance will be affected by equipment (Switch HUB), cable quality…etc. When using CAT.5e/CAT.6 cable connect transmitter and receiver directly without Ethernet switch, the maximum transmission distance up to 150M. You can also use model no: SR01 repeater for extended longer distance or using Gigabit Switch hub which support IGMP protocol and Jumbo Frame 8K for signal distribution or extend distance. -
Page 7: Remote Control Button Function
Remote Control Function: You could use the IR infrared remote control to preset channel selection. Using the IR remote control aim to the front panel of receiver or external IR receiver cable will be ok. Initial at first time use the remote control or after change battery of remote control, the IR remote control and the equipment Remote ID must be using same ID. -
Page 8: Remote Control Operation
Remote Control Operation: Select Channel: or or or Mode 1: use to select channel and press ENTER to confirm. Mode 2: enter the channel number and press ENTER to confirm the input channel. Select Menu Function: Mode 1: press MENU then use or ... - Page 9 Button Control Button Control setting 0 = Disable Button Lock Button Lock 1 = Enable IR Control IR Control setting 0 ~ 9 = IR Control ID IR Control ID IR Control ID setting 10 = User Define Controller 0 = Disable RS232 Control RS232 Control setting 1 = Enable (Case Sensitive)
- Page 10 Fast Switch Switch without stop link 0 = Disable 1 = Enable Conflict Check Check existing TX channel 0 = Hide Channel Name Display Channel Name 1 = Display Only Favorites Channel Only Favorites Available 0 = Disable Lock Favorites Lock Favorites Channel 1 = Enable Auto Sort Favorites...
- Page 11 Menu 40 Customize resolution need to be setup by RS-232 command or web page Menu 44 Use default EDID at TX side, copy monitor EDID at RX side. Menu 47~48 Monitor HDCP version setting, with incorrect HDCP version setting it will show black screen. HDCP Always On HDCP 2.2 Always On Description...
- Page 12 RS-232 Control: In RS-232 extender mode, user could use RS-232 port of transmitters to operate/setup the receivers at same channel by program like Hyper Terminal which built-in Windows XP and before version. Hyper Terminal setting:〔115200 bps (8-N-1), Flow control: None〕(Properties -> Settings -> ASCII Setup…...
- Page 13 Command and Parameters List: Command Remark Parameters Description Show current channel number [ 0~999 ] Switch to specified channel [ 0~999 ] NAME ? Check current channel name [ 0~999 ] NAME “string” Set channel name, 28 character MAX Transmitter not support NAME ? Show channel name setting parameter NAME...
- Page 14 FUNC ? Status of audio extension FUNC [ ENABLE | DISABLE ] Enable/disable audio extension ROUTING ? Status of audio routing ROUTING [ FOLLOW | 0~999 ] Set audio routing follow or specified Transmitter not support SELECT ? Status of audio setting AUDIO SELECT [ 0~2 ] Select audio of TX input/ Rx output...
- Page 15 Status of free routing Transmitter not support [ ENABLE | DISABLE ] Enable/disable free routing parameter LOAD and ROUTING LOAD [ 0~4 ] Load free routing setting SAVE SAVE [ 0~4 ] Save free routing setting RECONNECT Reconnect with TX/RX Disconnection (keep routing channel) DISCONNECT Stop all connection (Include routing channel)
- Page 16 Caution: 1. Transmitter/receiver boot time require 30 seconds and will be able to control after booting, First time reboot after reset to default will be longer than 30 seconds. 2. Not recommend to work with existing LAN connection to avoid large video, data transmission or multicast packets to slow down your other LAN devices.
- Page 17 APP Control Function: APP name: Stream & Videowall Management Google Play Download Link https://play.google.com/store/apps/details?id=com.sct.sctcontrollcenter1 iTunes Download Link Google Play Download QR code iTunes Download QR code For APP instruction please refer attached software CD To avoid confusion we do not recommend install multiple APP in one device...
- Page 18 Web Setting Function: System provide detail settings over web browser, you could input the IP address of transmitter / receiver at link column of browser if you know the exact IP address of them. How to get the IP address of receiver: 1.
- Page 19 Bonjour plug-in installation: a. Click “BonjourSDKSetup.exe” to install Bonjour plug-in for Internet Explorer. b. Click “Next” to continue. c. Click “I accept the terms in the license agreement” to continue. d. Click “Next” to continue.
- Page 20 e. Click “Install” to start installation. f. Click “Finish” to exit installation. g. Right click on “My Network Place” “Properties” then right click on “Local Area Connection” “Properties” then double click on “Internet Protocol (TCP/IP)” to setting as below: (IP address 169.254.111.111, sub mask 255.255.0.0)
- Page 21 Login in to the web setting: Use CAT5 cable to connect transmitter/receiver RJ45 port to PC LAN port, direct input known IP address of TX/RX, or open IE browser then select View Explorer Bars Bonjour. Double click on “HTTP on ast3-tx-xxxx(x= channel of transmitter)” or “HTTP on ast3-rx-xxxxxxxxxxxx (x= MAC address of receiver)”, it will pop up web setup in Bonjour windows as below: Click Network page you will see the IP address of transmitter/receiver...
- Page 22 System: Version Information Firmware version information Update Firmware Update system firmware Utilities System tools Factory Default Set system to factory default Reboot Reboot system Default EDID Set EDID to default Console API Command Run Console API command ...
-
Page 23: Video Wall
Video Wall: Basic Setup Bezel and Gap Compensation: Set outer width/height of monitor and width/height of viewable area. Wall Size and Position Layout: Set scale of video wall and position of monitor Preferences: Set extension way and rotation Advance Setup: ... - Page 24 Network: IP Setup: IP Mode could be Auto IP, DHCP, Static three mode Host default setting is Static IP, client default setting is Auto IP For mass deploying please use static or DHCP mode. Notice: if there is no DHCP server in network the host/client will keep reboot, you need to set the host/client to factory default Press channel button “-”...
- Page 25 Functions: For transmitter: Enable Video over IP: This function setup the video signals send from network, default is checked. Enable Video Wall: This function setup the video wall, default is not checked. Maximum Bit Rate: Set maximum bit rate. ...
- Page 26 USB over IP: Enable USB over IP: Enable/disable USB extender function. Operation Mode: Set USB operation mode. Recommand Auto select mode. Compatibility Mode: Set USB compatibility mode. Serial over IP： This function setup Serial (RS232) signal sends from network ...
- Page 27 Package: HKM02BT-4K Package Include: Transmitter x 1 USB A to B cable x 1 IR emitter cable x 1 IR receiver cable x 1 DC 12V 1.5Amp power adapter x 1 HKM02BR-4K Package Include: Receiver IR emitter cable x 1 IR receiver cable x 1 IR remote control x1 DC 12V 1.5Amp power adapter x 1...
-
Page 28: Specification
Specification: ITEM HKM02BT-4K HKM02BPT-4K HKM02BR-4K HKM02BPR-4K Copper Distance 150M (Use Network Switch Max 100M) HDMI Video Support Up to 4K UHD 4:4:4 @ 30Hz HDCP Compliant HDCP 2.2 HDMI Audio Support Up to 7.1 LPCM 192Khz / Dolby True HD / DTS-HD Master Audio / ATMOS / DTS:X HDMI Input HDMI Type-A HDMI Loop Output...